Fluid mechanics lab manual

At least eight experiments should be performed from the above list.

Fluid Mechanics Lab

To determine the co efficient of impact for vanes Apparatus: To determine coefficient of discharge of an orifice meter. The laboratory is also equipped with dual operating systems, post-processing softwares and peripherals Library. Collecting tank, Nozzle of given diameter, Vanes of different shape flat, inclined or curved.

PLIF PLIF is an optical technique used to calculate temperature and concentration distribution in mixing of fluids from the fluorescence intensity of an added dye.

Fluid Mechanics PIV An optical technique which measures velocity fields in fluid flows by capturing two frames at short time intervals, the displacement of the tracer particle from one frame to the other divided by the time gives the velocity.

Tech project work here. To show the velocity and pressure variation with radius in Fluid mechanics lab manual forced vertex flow.

Open Loop Suction Tunnel A 0.

To find critical Reynolds number for a pipe flow. To determine the coefficient of discharge of Notch V and Rectangular types. The test section size is 0. To determine the minor losses due to sudden enlargement, sudden contraction and bends.

To determine the friction factor for the pipes. Flow Visualization Setup The visualization table is used to visual the free surface streaklines due to flow around bodies using aluminium powder particles in water upto a maximum flow speed of 1.

To determine the meta-centric height of a floating body. At least ten experiments are to be performed in the semester.

Wall Jet Tunnel A jet over a stationary surface, called wll jet, occur in many industrial situations. If a vertical water jet moving with velocity is made to strike a target, which is free to move in the vertical direction then a force will be exerted on the target by the impact of jet, according to momentum equation this force which is also equal to the force required to bring back the target in its original position must be equal to the rate of change of momentum of the jet flow in that direction.

Boundary Layer Wind Tunnel Characteristics of the boundary layers that develop when flows pass over a stationary surfaces are investigated in this tunnel. Closed Loop Wind Tunnel A 1.

Studies with magnification up to 10X are possible. To determine the coefficient of impact for vanes.

Micro PIV Epifluorescent microscope, associated optics, illumination and syringe pumps for study of micro-scale flows. To verify the momentum equation. Figure shows the side view concentration map due to density driven mixing across a horizontal membrane at the bottom of the figure.

The tunnel can be used for flow induced vibrations studies also.

To determine the coefficient of discharge of venturimeter.LABORATORY MANUAL FLUID MECHANICS ME E. 2 LIST OF THE EXPERIMENT PAGE NO S. NO. NAME OF THE EXPERIMENT FROM TO 1. To determine the coefficient of impact for vanes.

2. To determine the coefficient of discharge of an Orifice Meter. 3. Complete Fluid Mechanics Laboratory - F Based around the F Hydraulics Bench, this range of equipment has been extended and reinforced with an integrated range of hydrostatics teaching accessories and some new hydraulics products.

CE Fluid Mechanics Sessional (Lab Manual) Department of Civil Engineering Ahsanullah University of Science and Technology November, Preface Fluid mechanics is an undergraduate subject for civil engineers which basically deals with fluids (water). Different equations and formulas are there to calculate the discharge.

Fluid mechanics lab manual cum observation note book. Buy Fluid Mechanics Laboratory Manual For Civil Engineering Students on motorcarsintinc.com FREE SHIPPING on qualified orders.

Channabasaveshwara Institute of Technology (An ISO NH (B.H. Road), Gubbi, Department of Fluid Mechanics Laboratory Lab Manual

Fluid mechanics lab manual
Rated 4/5 based on 8 review